Nitric oxide formation in gas turbine engines: A theoretical and experimental study

A modified Zeldovich kinetic scheme was used to predict nitric oxide formation in the burned gases. Nonuniformities in fuel-air ratio in the primary zone were accounted for by a distribution of fuel-air ratios. This was followed by one or more dilution zones in which a Monte Carlo calculation was employed to follow the mixing and dilution processes. Predictions of NOX emissions were compared with various available experimental data, and satisfactory agreement was achieved. In particular, the model is applied to the NASA swirl-can modular combustor. The operating characteristics of this combustor which can be inferred from the modeling predictions are described. Parametric studies are presented which examine the influence of the modeling parameters on the NOX emission level. A series of flow visualization experiments demonstrates the fuel droplet breakup and turbulent recirculation processes. A tracer experiment quantitatively follows the jets from the swirler as they move downstream and entrain surrounding gases. Techniques were developed for calculating both fuel-air ratio and degree of nonuniformity from measurements of CO2, CO, O2, and hydrocarbons. A burning experiment made use of these techniques to map out the flow field in terms of local equivalence ratio and mixture nonuniformity

Stellar and Molecular Gas Kinematics of NGC1097: Inflow Driven by a Nuclear Spiral

We present spatially resolved distributions and kinematics of the stars and molecular gas in the central 320pc of NGC1097. The stellar continuum confirms the previously reported 3-arm spiral pattern extending into the central 100pc. The stellar kinematics and the gas distribution imply this is a shadowing effect due to extinction by gas and dust in the molecular spiral arms. The molecular gas kinematics show a strong residual (i.e. non-circular) velocity, which is manifested as a 2-arm kinematic spiral. Linear models indicate that this is the line-of-sight velocity pattern expected for a density wave in gas that generates a 3-arm spiral morphology. We estimate the inflow rate along the arms. Using hydrodynamical models of nuclear spirals, we show that when deriving the accretion rate into the central region, outflow in the disk plane between the arms has to be taken into account. For NGC1097, despite the inflow rate along the arms being ~1.2Msun/yr, the net gas accretion rate to the central few tens of parsecs is much smaller. The numerical models indicate that the inflow rate could be as little as ~0.06Msun/yr. This is sufficient to generate recurring starbursts, similar in scale to that observed, every 20-150Myr. The nuclear spiral represents a mechanism that can feed gas into the central parsecs of the galaxy, with the gas flow sustainable for timescales of a Gigayear.Comment: accepted by Ap

An assessment of airfoil design by numerical optimization

A practical procedure for optimum design of aerodynamic shapes is demonstrated. The proposed procedure uses an optimization program based on the method of feasible directions coupled with an analysis program that uses a relaxation solution of the inviscid, transonic, small-disturbance equations. Results are presented for low-drag, nonlifting transonic airfoils. Extension of the method to lifting airfoils, other speed regimes, and to three dimensions if feasible

1-1.4 Micron Spectral Atlas of Stars

We present a catalog of J-band (1.08 um to 1.35 um) stellar spectra at low resolution (R ~ 400). The targets consist of 105 stars ranging in spectral type from O9.5 to M7 and luminosity classes I through V. The relatively featureless spectra of hot stars, earlier than A4, can be used to remove the atmospheric features which dominate ground-based J-band spectroscopy. We measure equivalent widths for three absorption lines and nine blended features which we identify in the spectra. Using detailed comparison with higher resolution spectra, we demonstrate that low resolution data can be used for stellar classification, since several features depend on the effective temperature and gravity. For example The CN index (1.096 - 1.104 um) decreases with temperature, but the strength of a blended feature at 1.28 um (consisting of primarily P beta) increases. The slope of a star's spectrum can also be used to estimate its effective temperature. The luminosity class of a star correlates with the ratio of the Mg I (1.1831 um) line to a blend of several species at 1.16 um. Using these indicators, a star can be classified to within several subclasses. Fifteen stars with particularly high and low metal abundances are included in the catalog and some spectral dependence on metal abundance is also found.Comment: 35 pages, 10 figures (3a-e are in gif format. For complete high resolution figures, go to http://www.astro.ucla.edu/~malkan/newjspec/) ; Accepted for published in ApJS; For associated spectra files, see http://www.astro.ucla.edu/~malkan/newjspec

Experimental Outlook for the Pentaquark

A critical look is taken at both positive and null evidence for the $\Theta^+$ pentaquark. Potential problems with experiments will be discussed and the question of what conclusion can be drawn from both the positive and the null results is examined. First the question of existence of the $\Theta^+$ pentaquark is considered, followed by a discussion of new experiments that are either planned or in progress to answer questions about its mass, width and isospin. Finally, indirect evidence for the parity of the $\Theta^+$ is examined, and suggestions for experiments to measure its parity directly are given.Comment: MESON2004 conference proceedings, 10 pages, 1 figur

A 43-Gbps Lithium Niobate Modulator Driver Module

This paper describes the realization of a 43-Gbps Lithium Niobate modulator driver module. The NRZ driver module utilizes four stages of GaAs p-HEMT MMIC amplifiers integrated with an output level detector and feedback loop to provide thermal stability and external control of the output swing. The bias and loop control circuitry are contained in the housing on a PC board external to the sealed MIC section. The integrated module (50.8 x 73.4 x 9.5 mm 3) provides 6.0 Vp-p controllable single-ended output voltage while dissipating only 4 watt

USING VIRTUAL REALITY TO REDUCE STATE ANXIETY AND STRESS IN UNIVERSITY STUDENTS: AN EXPERIMENT

Background/Objectives: Anxiety is common in the general population and also among university students, affecting their performance. Virtual reality (VR) devices can theoretically help alleviate anxiety pressures faced, by immersing participants in an interactive synthetic environment that is calming. The current study examined whether using a mobile VR device would support this theoretical position and help reduce anxiety levels in university studentsMethods: The study randomly assigned 30 participating university students to two groups: one experimental (VR) group and the other a control (reading task – RT) group. All participants first completed initial surveys (demographics, depression anxiety and stress scale –DASS-21 and a social desirability scale – SDS) and then were administered in turn the Trier Social Stress Test (TSST) to increase stress levels and the State – trait anxiety inventory (STAI-Y) scale to assess the anxiety-stress levels); followed by random allocation into either the VR experimental group engaged in a virtual tour of Hawaii or the RT group which read neutral extracts from a magazine). Following this, STAI-Y was again administered. Results: There was a significant difference between the VR and the RT groups with highly significant reductions in stress levels being associated with the VR group Conclusion:  The study demonstrated that anxiety levels could be reduced significantly through the use of VR technology. Further studies are needed in terms of suitable intervention scenarios, equipment quality, and in application to other mental health areas and to different community groups

The 1981 Argentina ground data collection

Over 600 fields in the corn, soybean and wheat growing regions of the Argentine pampa were categorized by crop or cover type and ancillary data including crop calendars, historical crop production statistics and certain cropping practices were also gathered. A summary of the field work undertaken is included along with a country overview, a chronology of field trip planning and field work events, and the field work inventory of selected sample segments. LANDSAT images were annotated and used as the field work base and several hundred ground and aerial photographs were taken. These items along with segment descriptions are presented. Meetings were held with officials of the State Secretariat of Agriculture (SEAG) and the National Commission on Space Investigations (CNIE), and their support to the program are described